This Mask consists of a number of templates to fit the Honeycomb Alpha and Bravo devices as well as fit the various knobs and buttons on the X-Touch Mini. The labels have been made in accordance with a custom made Spad.Next profile for the CRJ. I made good use of Les O'Reilly's excellent video guides to provide me with the appropriate mapping (via 'Online snippets') to the four devices I use (HC Alpha, Bravo, Logitech Radio Panel and X-Touch Mini). 

Then, I printed the label sheet out using a B&W Laser printer, on 'Quill' Stationery 200GSM 01 White Board (the board giving sufficient stiffness rather than paper), and used various compass cutters and knives to cut out the holes.

My intention is to make similar masks for further profiles as new aircraft emerge.

The labels apply as follows:

1. X-touch Mini mask goes around the rotating knobs/push buttons and main pushbutton bank (Layer A only). The top row button events are based largely in the order of use according to checklists. The top row are pushbuttons on the rotary switches  providing for STD (standardising Baro Press), HDG SYNC (synchronising heading at any time on the PFD), SPEED MODE (interchange between knts and mach), DME (adding DME dist to the PFD), ELEV/DH (interchange to enable incr/decr of either), FUEL X-FLOW, CONTINUOUS IGNITION (on overhead - switched ON prior to T-Off, and OFF after), and VHF2 which enables Comms 1 and 2 to be active together (e.g. to listen to ATIS while monitoring active frequency)

2. Alpha labels to suit white/red buttons, and the rotary switch (mapped to OFF/IRS Align/Stab trim/Mach trim/Yaw Damper) 

3. Bravo labels to suit flap axis (Up, 1, 8, 20, 30, 45 detents), and switches as indicated. Having the APU functions in one spot is most useful I've found.

Note: now 2 versions for the X-Touch Mini Mask - White writing on Black background and Black writing on White background

Hope this is useful for you.