4.65 STARS

6.4K+ Downloads


AIGround is a MSFS simconnect utility designed to improve AI taxi characteristics. AIGround: (1) holds the AI stationary on the tarmac after pushback for a more realistic amount of time, (2) perform control surface checks as they begin their taxi out, (3) increase or...

O stránkách

AIGround is a MSFS simconnect utility designed to improve AI taxi characteristics at the airport the user’s aircraft is located at.  

AIGround holds the AI stationary on the tarmac after pushback for a more realistic amount of time before the AI begins its taxi out.  

The AI will also perform control surface checks as they begin their taxi out (if control surface animations are supported by the AI model in use).

AIGround can also optionally increase or decrease the AI’s taxi speed.  

AIGround also prevents the AI from spinning while stationary at the threshold (a bug of the native AI control program).

The user can also optionally reduce or extend the AI landing and takeoff ground rolls.  

The user can also ZAP (remove) AI traffic that has become stationary and is blocking the user’s path by turning the landing lights on, then flashing the strobes off-on-off.  Although intended for ground use (taxi), the AI traffic removal tool can be used while the user’s aircraft is airborne to delete AI immediately in front of the user.

AIGround enforces better spacing between AI and the user’s aircraft when the user is performing a taxi-out or taxi-in.  AIGround does this by commanding the AI to temporarily stop in situations that the normal MSFS AI control program would miss.  Note however that the native MSFS AI taxi control program may continue to stop AI independently of AIGround.

AIGround does not require a configuration file to run, however the configuration file AIGround.ini is included, which contains several parameters that the user may change to suit personal preferences.

AIGround is designed to compliment the default MSFS AI program and thus is fully compatible with it.  Thus, AIGround is compatible with any AI-related program that places AI mostly under control of the default AI program (SU10), such as MSFS live traffic, MSFS off-line traffic and external AI injection programs that mostly rely upon the default AI program after injection.   

AIGround operates externally via simconnect and thus makes NO changes to the MSFS sim. 

See the included readme.txt and readme.pdf for additional details.

AIGround AIFlow SimConnect Traffic
Sim Update 11
První vydání
October 26, 2022
Poslední aktualizace
3 day(s) ago — 2.0.5



Velikost souboru

832.33 KB



Tento soubor byl zkontrolován na přítomnost virů a je bezpečný ke stažení.

Informace o souboru

4.65/5.0 — Vynikající!
Zatím nestaženo
Dnešní soubory ke stažení


  • Aktualizováno na verzi 2.0.5

  • Aktualizováno na verzi 2.0.4

  • Aktualizováno na verzi 2.0.3

  • Aktualizováno na verzi 2.0.2

  • Aktualizováno na verzi 2.0.1

  • Initial File Release

Na základě 23 hodnocení
v lásce


Povolení k nahrávání
Tento soubor nesmíte v žádném případě nahrávat na jiné stránky.

Povolení k úpravám
Než budete moci můj soubor upravovat nebo vylepšovat, musíte ode mě nejprve získat povolení.

Povolení ke konverzi
Tento soubor nesmíte v žádném případě převádět.

Povolení k používání majetku
Než budete smět použít aktiva mého souboru, musíte ode mě nejprve získat povolení.

© ClipperOS - All rights reserved. Jakékoli další nahrávání nebo šíření tohoto souboru bez předchozího písemného souhlasu autora je zakázáno. Tento Flight Simulator 2020 Mod byl vytvořen ClipperOS and shared in Utilities » Applications pro Microsoft Flight Simulator.

108 Komentáře

User Reviews

4.65/5 - Based on 23 reviews

Review data

5 star reviews
4 star reviews
3 star reviews
2 star reviews
1 star reviews

Podělte se o své názory

Pokud jste tento doplněk použili, podělte se o své názory s ostatními piloty.

Napište recenzi

Anyone uses AIGround and/or AIFlow with FShud ? Are there any conflicts ? Do they play nice with each other ?

Well done with both AIGround and AIFlow, your utilities seem to have sorted out all of the bunched-up aircraft, thus making all AI traffic more real when they are taxing, departing, and arriving. I haven't seen any recent GoArounds.

Hi, are there any updates planned for SU11?

Thank you for your great tool. I have installed AIground v2.04 and FSLTL 1.2.1 in MSFS SU11 WU11. Now I've two issues when running "AIground" and "fsltl-traffic-injector" in parallel, at various airports stock or 3rd party, like EGLL, EGCC, KBOS, CYYZ:

  • Aircraft stick to the runways on take-off, they run in the direction of the RWY to infinity
  • at EGLL at RWY09R aircraft cleared for take-off at "hold short node" seem to loose connection to the"nodes of the taxiway" and creep to south west across the water

The taxi behaviour works better than default - also after landing - according to the configuration settings of "AIground.ini".

I did that with default settings and a little tweaking in "AIground.ini" to accelerate movements during taxi (max. 22kts limitation on taxiways, 40kts on runways after landing).

My hope was to have faster AI-traffic movements on the ground, after landing and on taxiways, this works ok, but "take-off" with "FSLTL" running at the same time does not work.

When running "FSLTL" without "AIground" take-off" is no issue.

Is there a possibilty to check compatibility to "FSLTL"? Maybe there are side effects with "FSLTL", e.g. the removal of aircraft sticking at "runway nodes" for, e.g. >120seconds.

Do you have any blog or forum where one can follow your development and process for AIGround/AIFlow?

Would be really interesting to see what you are up to!

Hi there, thanks for fantastic addons. However, the AI aircraft did not take off, just slide on the grass besides the runway. How to fix this?

If you use addon linker you can add both airflowe (exefile) and air ground (exefile) to tools-options -additionals options, link exe file in there.

All looks good with the AI ground new hotfix ....landings are great now without changing the ini file , the only last thing which would make it superb is that when the aircraft are at stand thet rotate about 45 degrees after a short while , hopefully this can be fixed then it will be excellent , keep up the great work



3 month(s) ago / Poděkoval ClipperOS

slight correction it did it with the first landig and arrival at gate but the next six were all ok. Well done and many thanks for your time spent to date.

great addon but even with latest update they still hit the gate at 45' and start to slowly spin round. But keep up the good work as it does the trick with everything else.

Although it is good that aircraft do not stop when transitioning from rollout to taxiing speed, I prefer the previous version where I could extend the rollout to just ahead of the taxiway turnoff before the plane slows to taxi speed using AILANDINGTARGETTIME.

Now when I set AILANDINGTARGETTIME to anything above 0 as soon as aircraft exit the runway they charge off like an enraged rhino across the airport running through buildings etc and heading off cross country to the horizon.

Good work on this.

My only two issues are that the aircraft come to a dramatic stop on rollout too soon and then continue, although with your ini fix they do depart the runway quicker which is great.

The other thing is which has been mentioned and I know you are looking into is that they taxi to stand a bit fast and start to spin at gate , if these issuess are fixed then it wil be perfect.

"To start AIGround automaƟcally when MSFS starts, add an entry for AIGround to the MSFS exe.xml file at:


The only xml file I see there is the SimConnect.xml. No exe.xml. Even if there were one I wouldn't know what to add. Can anyone enlighten me?

I just tried this mod and was excited to see two GA aircraft taxiing out to the active runway. Their speed seemed realistic, one following the other. Each stopped for half a moment before turning onto the runway - good - then each, in turn, taxied about 25 meters along the runway before actually starting their takeoff roll. Odd.

I didn't watch the first one carefully but noticed, when I looked for it, I couldn't see it climbing out. The next one I watched and it seemed to disappear after passing the end of the runway. I fly in VR with a Rift S so _maybe_ it just pixelated away at that point. I don't know.

This looks promising but, I have to say, landing at another similar sized airport - with parking spaces - I didn't see any taxiing happening. I fly every day so we'll see what happens today.

I've yet to land or take off from an airport with jet liners so I haven't witnessed AIFlow in action yet. Hoping for good things with it.

Liked. Will add stars after more testing.

thank you very much for these fabulous plugins AIGround and AIRFlow thank you very much for this. Can someone help me with two problems I'm having

1. In the airports where the planes never take off, with these tools they manage to reach the runway and do not stop, but they behave strangely. After 2 seconds the plane moves but does not turn on the white strobers and moves as if it were in a taxi. what am I doing wrong

2. How do I get both programs to start automatically when I start MSFS on STEAM?

hope someone help me

does this work with fsltl ai traffic??

"AIGround can also optionally increase or decrease the AI’s taxi speed."

does this mean aiGround decides when to increase taxi speed up to the max limit set in the .ini? or does it mean aircraft will always taxi with the set speed. or how is this supposed to work? because I dont seem to see any change in taxi speeds even when setting 40.0


The main thing I need with AI. When cleared for takeoff. Right now they take forever to takeoff. Hurry up line up and move! no longer than 30 seconds. Same for landing they need to get off the runway under 30 seconds, now they can just take a 5min stroll on the runway after landing causing countless go arounds. These two things alone would improve traffic flow.



3 month(s) ago / Poděkoval ClipperOS

Just wanted to say that since the new versions (>2.0.1) of AIFLOW and Ground I've not had any CTD with all AIG and FSLTL AI installed 😊



3 month(s) ago / Poděkoval ClipperOS

Great tool. But one issue I found that when planes are coming into park in a stand, they are coming in way too fast and overshooting the stopping point, sometimes crashing into nearby things. Please look into this.

Tyto položky jsou v současné době na seznamu a budou brzy zpracovány!
Návrhy, chyby a nápady do budoucna.

  • Version 2.0.5 January 24, 2023

    (1) user aircraft-AI spacing enforcement (and traffic zapper) now apply to both AI aircraft and AI ground vehicles (default).
    (2) AIGround now remains active when user in air, but below 2000 ft AGL (default) to help when AI is PRECEDING the user’s aircraft on final approach (the AI can complete its rollout & vacates quickly under control of AIGround).
    (3) added option to disable fast AI turns off runway after landing (in cases where AI is overshooting taxiway while vacating).
    (4) fixed prop AI not vacating runway (disabled high speed exit for props for now due to nose wheel skid issue).
    (5) added system tray icon options.
    (6) .ini read after file changes saved (i.e., periodic read deprecated).
    (7) fixed AIPUSHBACKHOLDTIME=0 (i.e., disabled) causing AIGround crash.
    (8) fixed occasional output console freeze.
    (9) fixed occasional AIGround crashes and various code optimizations.

  • Version 2.0.4 November 10, 2022


    (1) added AI high speed runway taxi after the landing rollout (default 40 kts). Helps get the AI off the runway quickly after landing, see AITaxiSpeedOnRunwayAfterLanding in readme.;
    (2) changed default landing and takeoff rollout times to 5 and 14 seconds respectively (enabled) to better support the new fast runway taxi feature and to support faster AI runway operations generally at busier airports;
    (3) added auto-removal of AI that had has stopped taxiing for a specified period of time, see AIZapAutoTime in readme;
    (4) fixed AI vacating the runway too quickly while turning.

  • Version 2.0.3 November 05, 2022

    2.0.3: (1) fixed AI landing rollout sudden stop; (2) tweaked taxi algorithm to reduce occasional spinning at gate; (3) fixed frozen console (e.g., user scrolling through console) sometimes stalling program, increased console output efficiency and added succinct mode (verbose=0) eliminating AI status messages.

  • Version 2.0.2 November 02, 2022

    2.0.2: fixed thread issue that occasionally caused AIGround to crash by itself (AIGround would end, but NO sim CTD).

  • Version 2.0.1 November 01, 2022

    VERSION 2.0.1:  (1)  fixed issue with SimConnect erroneously causing sim to CTD when reading AIG AI text data and also added an AIG compatibility testing mode as backup if still experiencing issue; (2) fixed high CPU occupancy BEFORE connecting to sim; (3) added quick "push" after landing rollout to force AI to vacate runway quicker.

  • Spuštěno October 26, 2022

    První verze tohoto souboru byla právě spuštěna. Vítejte na palubě!

Často kladené otázky

Máte otázky? Zde naleznete řešení.

Je tu docela prázdno.


Tito uživatelé přispěli na ClipperOS aby i nadále vytvářel úžasné doplňky, které si každý může užít.


These add-ons may be required or recommended to use.

Je tu docela prázdno.