Due to release of EDFH by RFscenerybuilding this scenery is not going to get any updates anymore
Frankfurt Hahn Airport (EDFH) is international airport in South-West Germany. It used to be one of the largests cargo hubs in Europe and an importand redistribution area for Aeroflot Cargo followed by ABC Airlines after former demise as well as for Air France Cargo and multiple cargo operators from Asia and Arab countries.
Nowadays we can easily say that HAhn has seen its better days already.
This is improvement pack to default airport. I tried to recreate the atmosphere of a large cargo hub Hahn once was. I replaced few buildings to match a bit more closely the original, I placed lights on the apron, hazard lights, barriers, cargo equipment etc. I hope this modification will make it more fun for all of you to fly to and from Hahn.
There are multiple 3rd party libraries needed:
Animated Human 3D Models Library - https://flightsim.to/file/33166/animated-humans-library
German Emergency Vehicle Pack - https://flightsim.to/file/27286/german-emergency-vehicle-pack
Superspud Airport Asset Library - https://flightsim.to/file/23692/superspud-airport-asset-library
Winter Asset Pack - https://flightsim.to/file/23158/winter-asset-pack
totof library object V5 - https://flightsim.to/file/17179/totof-library-object-v1-1
Pascal's library - https://flightsim.to/file/16930/pascal-s-library
Windy Things - https://flightsim.to/file/14024/windy-things
TurtleTank's Scenery Developer Objects and Material Library - https://flightsim.to/file/13290/turtletank-s-scenery-developer-objects-and-material-library
Wombiiactual ENxx Asset pack - https://flightsim.to/file/12208/wombiiactual-enxx-asset-pack
BeeKay-Pack1 v5.0 - https://flightsim.to/file/8887/beekay-pack1
Emerald Object Library - https://flightsim.to/file/8824/emerald-object-library or marketplace via MSFS
SDR Scenery Pack V1.5 - https://flightsim.to/file/6072/sdr-scenery-pack-v1-0
Dave's 3D animals Library - https://flightsim.to/file/6841/dave-s-3d-animals-library
Dave's 3D People Library - https://flightsim.to/file/5452/dave-s-3d-people-library
EDHK Lights & Objects Developers Pack (Asset-Pack) - https://flightsim.to/file/2549/edhk-lights-pack
Dave's Crooked Library - https://flightsim.to/file/4696/dave-s-crooked-library
Mikea.at - AssetPack - https://flightsim.to/file/1923/mikea-at-assetpack
Common Airport Objects - https://flightsim.to/file/854/common-airport-objects
JPfillion Aircraft librayr - https://www.jpfil.com/quebec-fs2020/collections.htm
jhd-library - https://flightsim.to/file/28208/jhd-library - NOT NEEDED
German Emergency Services - https://flightsim.to/file/27702/german-fire-vehicles - NOT NEEDED
PBK Effects Library - https://flightsim.to/file/21769/pbk-effects-library - NOT NEEDED
JB's Scenery Models - https://flightsim.to/file/16640/jb-s-scenery-models - NOT NEEDED
I did attach the dev files, so if anyone is skilled at creating buildings and getting the scenery looking more like in real world, feel free to use them, please publish these later on so we can all enjoy this airport more and more.
The only request I have for developer who will publish their work is to include me as co-creator :)
Thank you EDDB2020 for contributing greatly to update 1.3!
Happy landings!
3 months ago
3 months ago
pandamisha
andyli
Great!!!
1 years ago
Julianmsfs2020
When will the update finally come?
1 years ago
When it will be ready :P When I will have time to finish what I started :) Possibly within next two weeks.
1 years ago
pandamisha
antonmagryanair
Can you maybe remove the MSFS ground vehicles. The Buggen very much around (slowly drive back and forth) and for GSX users it's just annoying anyway.
1 years ago
Hi
Ground vehicles will be replaced with static vehicles. It will take few days because there's light effects that I will add to these vehicles as well as beacons etc. I think I will bring that in next update. For now my priority is setting the metal barriers around pax area and I will try to work a bit more on terminal (I will try to add some gates so it looks a bit more humane).
1 years ago
pandamisha
antonmagryanair
MSFS conveyor belts bug in the scenery and go back and forth. In general, the stands are too full (in my opinion).
1 years ago
It's nkt only conveyor belts but also all asobo grounds services. I can't find a way to anchor these vehicles so they would not move. I will probably remove most of them at some point and replace with statc vehicles.
Regarding the apron equipment. I probaby will not remove much of the equipment (if any). I just had a look at old pictures, recordings, google and bing maps and placed equipment as it (roughly) was when the airport saw it's better days :)
Regarding libraries. Limiting the number of these will be very hard and at the moment I don't see the way to do it further beyond what I managed already. F.ex if you look at the screenshot where horses are being loaded, you will be looking at six different libraries only on thione s screenshhot.
Hope that answers
Best
Andrew
1 years ago
pandamisha
antonmagryanair
Far too many libraries that you need, to be honest, more than 20 libraries are just annoying (I don't always know how to install each library).
What I would improve as soon as possible:
And again; this is not hate but just tips, we are all grateful for your work!
1 years ago
Hello :)
At the moment I will not be able to reduce the number of libraries further, therefore I'm sorry to say, but 5 libraries is not achievable for this project (at least at the moment) if I want it to look the way it does.
At the moment I do not plan to work on ground textures, at least not to extent you're hoping, but I might make some changes in the future.
I was already looking at removing trees but I'm doing something wrong when creating polygons and these are not respected by the sim, a.k.a. can't get the mods to work. I hope, that by sharing dev files as well, there will be someone willing to make some corrections as well :)
GSX profile is not possible as I'm not using GSX.
Hope that answers your questions and clears the doubts :)
1 years ago
pandamisha
antonmagryanair
I think it's silly for people to complain about dependencies, but could I make a request that you list them under the dependencies feature of flightsim.to, which automatically tells me which ones I've already downloaded. Thanks.
1 years ago
Hello
I will try my best to fulfill your request :) I'm just not sure how to do it :)
1 years ago
pandamisha
foxquakes
Hallo und vielen Dank für die Idee und Aufwertung des EDFH Airports.
Mir ist aufgefallen, das -bei mir- der Tower nicht dargestellt wird (nur der obere rote Warnleuchtenkranz).
Aus welcher Quelle (Mod /WU/SU bzw. Airport) stammt der Tower um angezeigt zu werden?. Alle von Dir angegebenen Abhängigkeiten sind eingespielt.
Beste Grüße und ein gutes Jahr 2023!
1 years ago
Hello
Thank you for pointing that out. I was convinced the tower and surrounding buildings came from default MSFS library.
I will check that and get back to you or replace tower if it comes from other library that I did specify.
Happy New Year!
1 years ago
pandamisha
Bing
over 20 other mods needed for a single small airport? what is the crap? I respect everyone who creates mods, but that doesn't work at all
1 years ago
I'm sorry you see it this way. There are good reasons for which I have so many libraries here, but in general I can say, that it's to make the airport as alive as I can so we can enjoy it a bit more before someone decides to do it better.
Please refrain from using such words to describe someone's work.
1 years ago
pandamisha
Onkelpuh
good job thank you
1 years ago
FicaFlying
Yes, too much dependencies for too less improvement. Even the tower has no improvement. Thx, but i'll pass. Sorry.
1 years ago
no you're not forcing anyone. But being open to feedback in general makes a better product.
1 years ago
Archer374
PatrickF
too much dependencies for this airport.....However your effort in making this airport with all its dependencies intacked looks great. I hope in a future update everything including the dependencies are included. Many thanks for sharing!
1 years ago
Hi victimblue
The updates in the future will focus on removing some of the dependencies as well as updating the airport so when downloading updates do review the list of dependencies in the file description as this will (hopefully) be getting shorter :)
1 years ago
pandamisha
victimblue