>for Spadbnext > Home - SPAD.neXt (spadnext.com)
Profile
PANEL RADIO: To have the Baro information in Hpa and HG simultaneously (inclus Multi-Panel Basic)
(independent of the choice in the plane)
a tutorial (if you prefer to do it yourself) in French .-(
The Profile already realized and functional for the multi and the radio panel
Result: As soon as you set the Baro, you will automatically have the Hpa value on the left and the corresponding HG value displayed on the right.
Just press act/stby to get the transponder on the right
Jype 09-08-2021
PANEL RADIO: Pour avoir l'information du Baro en Hpa et HG simultanée
(indépendant du choix dans l'avion)
un tutoriel (si vous préférez le réaliser vous même) en français .-(
Le Profil déjà réalisé et fonctionnel pour le multi et le radio panel
Résultat: Dès que vous réglerez le Baro, vous aurez automatiquement la valeur Hpa à gauche et la valeur HG correspondante qui s'affichera à droite.
Il suffira d'appuyez act/stby pour retrouver le tranpondeur à droite
Jype 09-08-2021
C'est intéressant mais j'ai quelques questions. Quand le Barom est réglé avec le panneau radio, est-ce qu'il change aussi dans l'avion et garde l'altitude correcte ?
ce que vous changez sur les panels est automatiquement repris par la simulation de FS2020: c'est le logiciel "spadnext" qui fait le lien entre le panel et la simulation, de la même manière que le Plugin fournit par Logitech pour ses panels. Mais spadnext fonctionne mieux que le plugin officiel et avec tous les avions . De plus il permet de gérer beaucoup plus de choses et de programmer des fonctions spéciales comme celle que je vous présente ici. Il peut aussi être utilisé simplement ( version gratuite) , vous chargez un profil de base et vous jouer ou vous profitez de profils plus complexes réalisés par d'autres .-)
Pour fonctionner, est-ce que l'interrupteur radio doit être réglé sur XPDR ou est-ce que l'interrupteur sur lequel il est réglé ne fait aucune différence ? Sera-t-il toujours actif sur le panneau radio inférieur ?
Je comprends pas exactement la question .. mais le panel affiche par exemple 1013 HPA Baro à gauche et 7000 à droite pour le XPR... quand vous allez régler le Baro à gauche avec la grosse roulette, l'écran de droite changera pour vous indiquer la correspondance en HG dans ce cas 29.92.. donc à ce moment vous aurez les mesures baro une HPA à Gauche et la HG à droite...
si vous voulez que l'écran de droite reprenne l'affichage Xpr, il suffit d'appuyez sur la touche rectangulaire à droite et le panel affiche le Baro à gauche uniquement en HPA et le XPR par exemple 7000 à droite... comme à l'origine
voilà c'est passé au traducteur je parle français. alors il y aura peut-être des incohérences
PS Attention ce que je propose, c'est un profile à charger avec le logiciel Spadnext... que vous devez obtenir sur le site mentionné en début du post 😊
Bons vols
Jype
3 years ago
Jype
This is interesting but I have some questions. When the Barom is set with the radio panel, does it also change in the plane and keep the correct altitude?
what you change on the panels is automatically taken over by the FS2020 simulation: it is the "spadnext" software that makes the link between the panel and the simulation, in the same way as the Plugin provided by Logitech for its panels. But spadnext works better than the official plugin and with all planes. Moreover it allows to manage much more things and to program special functions like the one I present here. It can also be used simply (free version), you load a basic profile and play or enjoy more complex profiles made by others .-)
To work, does the radio switch have to be set to XPDR or does it make no difference which switch it is set to? Will it still be active on the lower radio panel?
I don't understand the question exactly ... but the panel shows for example 1013 HPA Baro on the left and 7000 on the right for the XPR... when you go to set the Baro on the left with the big wheel, the right screen will change to show you the correspondence in HG in this case 29.92... so at that point you will have the baro measurements one HPA on the Left and the HG on the right...
if you want the screen on the right to display Xpr, just press the rectangular button on the right and the panel will display the Baro on the left only in HPA and the XPR for example 7000 on the right ... as originally
here it is passed to the translator I speak French. then there will be perhaps inconsistencies
PS Attention what I propose, it is a profile to be loaded with the Spadnext software... that you must obtain on the site mentioned at the beginning of the post 😊
Good flights
Jype
3 years ago
Jype
how to install?
3 years ago
Well, you need SpadX...then you just load it as a profile
3 years ago
UKWidowmaker
zero07
Éxcellent, thank you
3 years ago
UKWidowmaker