CAMERA VIEWS TO USE WITH MSFS2020 (need Lorby's Axis and OHs)
No need to use your Camera from the Toolbar anymore! Here is a complete set for your camera settings within MSFS2020. This pre-configured profile is just an example how you can use your preferred views directly from your Streamdeck. This is configured for the XL version. You may adapt this profile to your 3x5 deck with Lorby's streamdeck editor. Get it from here.
Installation:
Just double click on the provided streamdeck profile file. It automatically gets imported as a new profile in your SD software. Import cameras.xml file into your AAO software (make sure you don't have connection to your SIM while importing). That's it and you are good to go.
Instructions/Explanations:
This profile is structured from top to bottom rows (horizontally) with (internal) cockpit views, external cam views and show case views.
The top row includes Drone mode and pre-configured Pilot and Co-Pilot views (unique for any aircraft) as well as 2 buttons where you can cycle through EXT/INT views.
When a respective view is chosen, then it will light up green and the CAM status will also light up on the left (toggle button) and show you what Camera state is chosen.
With this opportunity you can set every camera view that is possible within the SIM to your like without going to the toolbar and choose different settings every time. And that with a simple click on a button.
Camera State 2 - COCKPIT
3 - EXTERNAL
4 - DRONE MODE
5 - SHOWCASE
Check out the script group "CAMERAS" in your AAO software (under RPN SCRIPT EDITOR) as there are many more camera options available as displayed on the SD. Adjust it to your like. You also will find toggle options for some views. That will give you an example that you also be able to toggle between 2 different views with the same button. Especially helpful with aircraft where you have 2 different views for the same part, e.g. B737/A320 with upper/lower overhead. Now you can toggle between upper/lower OH by just clicking the button twice etc.
All my published aircraft SD profiles on flightsim.to do already have the right CAM VIEWS built in as views are different to every aircraft.
If you need any assistance, help or support join my discord server (found under my profile on flightsim.to). Report any issues or bugs found. Don't forget to give it a like and consider a small donation as finding/writing scripts and creating icons etc. is a very time consuming work. This will keep up the updates and further developments. Thank you!
thank you so much for your work.
Not sure the fault is on my side or not but here are my issues/bugs
1. Can't go directly back to PILOT VIEW from COCKPIT INSTRU VIEWS (I have to press on COPILOT first)
2. I can go back directly to PILOT VIEW from any of the second line COCKPIT INSTRU VIEW if i pressed COPILOT VIEW before selecting one of the COCKPIT INJSTRU view...then from there, it's ok to go to PILOT VIEW directly without going through COPILOT view.
3. If I pushan COCKPIT INST VIEW and switch to EXTERNAL QUICKVIEW or SHOWCASE EXTERNAL, then if i push any of the EXTERNAL QUICKVIEW or SHOWCASE EXTERNAL, PILOT or COPILOT VIEW CYCLE VIEW IN AND EXT, I'LL BE TAKEN BACK TO THE COCKPIT INST VIEW. Going from external views to showcase views and vise versa works.
4. Same as 3... If i have any of the external quickview or showcase external views selected and hit any cockpoit instr, it will take me to the last cockpit instr i selected.
5. CYCLE EXTR VIEWS stops at view 04 and skips 05 to 07
6. if i select an external view and go back to copilot or pilot view , cockpit instru or showcase external and select back an external view, no matter which one i select, i will be taken back to the last previously external view
7. If i select PILOT or copilot, then i go in any of the external quickview or shocase view, when i hit copilot, i ll be taken to pilot view instead of copilot if pilot was clicked on before, vise versa with copilot.
2 months ago
2 months ago
Chris_PU_A320
xavier
i cant use the camera views. I import the Data into a streaming deck but the results are are `Toogle´ on all Buttons. Plz help.
8 months ago
8 months ago
Chris_PU_A320
Maki89Delta
und herzlichen Dank für die tollen Profile.
Ich habe nur ein Problem mit den Profilen im StreamDeck.
Ist es möglich ein View-Profil auf mehreren Flugzeugen zu verwenden? Ohne dann jedesmal zum letzen Flugzeugprofil wieder wechsen zu müssen?
Ist es irgendwie über Multi-Aktion Funktionen möglich, oder muss ich zu jeder Maschine ein entsprechendes View-Profil anlegen?
Herzlichen Dank
10 months ago
10 months ago
Chris_PU_A320
Werter_3547
1 years ago
1 years ago
Chris_PU_A320
godmanpicoli
This is a very interesting little addon.
I am concerned that every plane appears to require its own set of routines for streamdeck, and am wondering just how hard it would be to generate a set that covers, say, all single-engined planes, and contains all the commands that you might need to fly that type of aircraft without having to resort to messing about looking for an obscure keyboard combination to carry it out.
There are, after all, a finite number of commands that can be used with the sim, and presumably, most of them are identical, regardless of the plane itself, apart from the gross differences between turbine and piston engines, and those items of addon that constitute the special addons, such as different navigation programs.
Thanking you in anticipation
1 years ago
This set just covers commands in general and shows the user how to adapt it to their needs. All my profiles come with special configured view profiles. Easy to install and use…
1 years ago
Chris_PU_A320
JohnG
This will be quite helpful, thank you sir. I have sent you a little something for your time... Your pal, Skylar.
1 years ago
PoseidonsMyth